As in plasterboard sheets? I don’t see why not if hand loading, plenty of vans will fit a 2400x1200 sheet (my Transporter fitted a bunch of plywood with room to spare). Loading one with a forklift is harder due to no side access long enough to fit 2400mm but that’s a problem shared with tub back utes. If however your plasterboard pallet is side accessible a van with barn doors (like you’d buy if pallets were a priority) will allow you load it in fine.

The thinking involved in driving a manual is very minimal once you get used to it, so I reckon any safety issues caused by that would be outweighed by a reduction in the unfortunately common situation of unintended acceleration crashes. You are lot less likely to drive through the nearest wall (or kids) if your instinctual reaction to moving when you should not be is to also go for the clutch and cut power instead of just pressing harder on the wrong pedal.

They have a clutch, but once you’re moving it is possible to shift a manual transmission without using the clutch. What you need to do is first take off the load currently passing through the box (if power is being transmitted either direction it holds the engagement dogs in place), so if accelerating you quickly let off the throttle and if decelerating you quickly tap the throttle. This lets you move into neutral, once in neutral you increase or decrease the engine revs to near (ideally exactly) what they would be in the gear you want to shift into at your current road speed, and holding those revs you can then shift smoothly into the new gear.

It is not something I would recommend unless in a jam with synchromesh transmissions (e.g. regular cars, light trucks) as most people aren’t going to get it exactly right every time and will just burn out the synchros. If you’re unfamiliar with the term these are the parts of the transmission that let you shift from one gear to another in one motion without having to stop in neutral, let the clutch out, and increase/decrease the engine revs to suit your desired gear before clutching in and shifting into it.

Clutchless shifting can and does work well in non-synchro transmissions (e.g. motorbikes, many heavy trucks) once you get the knack, as these transmissions are both more forgiving of not being exactly rev matched and will provide a strong auditory signal if you don’t get it close enough (i.e. you’ll know if you got it right or not so won’t half arse it). Many motorbikes now actually automate this process with devices known as quickshifters - named so because even when doing it by hand clutchless shifts on a bike are noticeably faster than using the clutch.

The sun would be the most obvious choice for such a reference point, though it’d be amusing to make it Greenwich and therefore make everyone deal with Earth’s rotation and orbit if they want extremely precise calculations (though I expect there wouldn’t really be a practical difference on that scale).

The design of the front forks also assists with stability - having some rake and trail means the front wheel has a tendency to self centre (particularly at speed).

If I’m doing a small shop I’ll take a bag in, fill it up as I go, then everything goes out at the checkout and ends up back in the bag. I’ve never had anyone care about this and I’ve been doing it for a few years now (ever since the old plastic bags got banned in my area).

I think the main problem with searching for fediverse posts is not that they’re not indexed but the lack of a singular tag to append when you want to search for them. To search for reddit posts it was easy because you could put in your keywords and stick ‘reddit’ or ‘site:reddit.com’ onto the end, but now there’s too many domains to keep track of and you can’t rely on appending ‘lemmy’ pointing a search engine towards all Lemmy instances, let alone kbin/mbin instances.

I do like Whirlpool, an Australian forum primarily centred on technology. It’s still active despite the general decline of forums, has a lot of useful info to turn up in searches, and I appreciate how it has remained clean and fast without the visual clutter and wasted data of modern web design.

I’ve found a plunger useful for a sink occasionally, a bit of back and forth plunging can loosen up a hairball or break a layer of fat/soap scum. On the other hand I’ve never needed to use a plunger on a toilet - I don’t know how much of this is exaggeration on the internet but Australian toilets don’t seem to have anywhere near the amount of issues the American designs do.

It’d be interesting to see how much this changes if you were to restrict the training dataset to books written in the last twenty years, I suspect the model would be a lot less negative. Older books tend to include stuff which does not fit with modern ideals and it’d be a real struggle to avoid this if such texts are used for training.

For example I was recently reading a couple of the sequels to The Thirty-Nine Steps (written during WW1) and they include multiple instances that really date them to an earlier era with the main character casually throwing out jarringly racist stuff about black South Africans, Germans, the Irish, and basically anyone else who wasn’t properly English. Train an AI on that and you’re introducing the chance for problematic output - and chances are most LLMs have been trained on this series since they’re now public domain and easily available.

A broken wisdom tooth with one of the parts rubbing against the nerve that passes through that side of the lower jaw. Definitely would not recommend, it did cost me ~$2k to pull those wisdom teeth (or what remained of them for the lower ones) but it was well worth it.

Edit: Found the x-ray image of that tooth, the dentist told me the white line running past the bottom of the broken tooth is a nerve.

A blue ringed octopus - they’re a cute looking tiny octopus but quite capable of killing a human.

What’s worst is that after getting bitten by one you will be mentally alert but completely unable to do anything as you feel your body just stop doing things that keep you alive (like breathing)…

You pour a bit of boiling water down the side of the cylinder then run your hand down where you poured the water - you will feel a clear delineation in the temperature of the cylinder at the level of the liquid gas inside.

Boiling the jug and pouring a bit of hot water on the cylinder seems like it’d be less work than digging out the Wii fit gear, unless of course they use it more regularly rather than just for weighing gas bottles.

Weirds me out that she’s got the watch in right hand though

If you’re left handed the right hand is the normal hand for a watch, it’s not that unusual.

Admittedly it’s less common to see anyone wearing a watch now, and there’s less of a reason to put it on your right hand now that most people don’t handwrite regularly.

I never had a problem with walking around cows as a kid and I did it pretty often. Visitors would get spooked occasionally because cows love to follow you and see what you’re up to, but I never got chased or anything. That was beef cattle country though so these cows were mainly cows (female) and steers (castrated males). I’ve heard that some bulls could be territorial however so your mileage may vary if one is around - the couple I’ve walked around were fine but your chances of issues are higher with them.

Yes, the move towards integrating the infotainment further into the car with propitiatory parts instead of generic sizes and not separating out vehicle related controls is definitely going to make long term upkeep harder.

All cars could last a lot longer if people kept maintaining them and - importantly - didn’t damage them. Electric cars are not going to be immune to this, I can’t see them lasting much longer on average than ICE cars.

Keep in mind that even when you change out the engine for something with less parts the rest of the car still remains and contains things which will eventually cause issues. For example I bought a cheap van a few months ago and here’s some of the reasons it was cheap that are not ICE specific:

• Steering wheel lock mechanism sticking
• Air distribution flap cables kinked/binding so A/C only blew at feet
• Central locking on side door sticking
• Rear shocks leaking
• Front strut mount bushings worn
• Head unit not functioning

Presumably the previous owner just didn’t want to spend the money on fixing these issues as they arose, and eventually it added up into a lot of potential expense (if you have to pay someone to fix it for you) and more reasons to sell the car. Such behaviour seems pretty common in my experience and I fully expect it to continue with EVs. It’ll be hard enough to get people to even maintain their brakes and change the motor coolant considering the natural reluctance of people to spend money on maintenance and this unfortunately prevalent idea that EVs don’t need it.

Funnily enough the main ICE specific problem with that van was just as much an electrical issue as part of the petrol engine - an intermittent secondary air injection error code which ended up being down to a combination of a sticking valve and a fuse with a hairline crack causing an intermittent connection.