insomniac_lemon

I was worried the remaster would take some of this away, but it looked just as good.

The PS2 version looks great after upping the internal res (not sure how much other stuff like filtering/other technicals has an effect). I haven’t compared it, but like most remasters I’m going to just say the data bloat is probably not worth potential fidelity improvements. That and I’d guess any design issues are still baked in, thus similar experience.

EDIT: In Okami’s case I don’t know if the data size is due to uncompressed files or just due to higher-res pre-rendered videos, but either seems wasteful to me. What is live-rendered and what is pre-rendered just seems arbitrary to me, I’d get if it weren’t viable on older hardware but you’d think a remaster could handle it mostly in-engine.

I want to use Raylib, but mentioning it here on the fediverse doesn’t get much of a response (I can’t see a raylib community from my instance). My choice of language probably doesn’t help, though.

My first issue is wanting vertex colors on 3D models and I am not getting this (this may be a problem with the bindings I’m using, naylib(nim-lang)). The second would be needing guidance for the 2D polygon text loader that I started.

Maybe I could make simple GUI applications with raygui, but I don’t currently really have many viable ideas on what I would want to make.

To OP: Another potential option is using Godot w/bindings. Design is pretty fast and flexible, then using signals is super easy.

I’ve tested some frameworks (specific to my language, so not really helpful to most), the one that I liked more said it was declarative user interface framework based on GTK though I would prefer a similar thing for Qt and there wasn’t an ability to automatically scale text size to better fill the available button size (I was testing an adventure-book reader and hoping to use unicode characters).

Frameworks for single page applications (or some other browser-based tech) might be ok for simple stuff. Similarly, I’ve liked the idea of TUI frameworks (yeah, because htop) but haven’t really tried that yet.

Reminder on Stockholm syndrome:

According to accounts by Kristin Enmark (one of the hostages): the police were acting incompetently, with little care for the hostages’ safety.

She had criticized the police for pointing guns at the convicts while the hostages were in the line of fire, and she had told news outlets that one of the captors tried to protect the hostages from being caught in the crossfire

but the prime minister [Palme] told her that she would have to content herself with dying at her post rather than Palme giving in to the captors’ demands.

Ultimately, Enmark explained she was more afraid of the police, whose attitude seemed to be a much larger, direct threat to her life than the robbers.

Which could possibly be relevant here, particularly the civil war part.

You could also call it a shopping plaza, either in a line or 2 (or possibly 3) sides along its parking lot.

Also bundled with those giant signs that list every store in the plaza.

When that older DX game port was released, I think it took like 3 or 4 days for them to take it down. Probably even like a patch stomp tuesday situation when the interns hand off the script detections off to the lawyers.

It might take a bit longer if people stopped using sites like Youtube and Github, and tried not to include trademarked terms (or super-identifiable audiovisual content) anywhere.

Seeing unknown: “What’s he building in there? …we have a right to know.”

The bigger issue IMO would be that not everyone has quality sleep, so they might not have a long uninterrupted time in REM to properly dream.

Personally even when I’m in the right state to experience dreams (the type that I do remember) they usually aren’t very vivid, for the above reason or possibly something else. I also have aphantasia so it may be related (or other brain/life stuff). Once I did have a colorful-yet-still(ish) dream related to then-recent photography.

@Hegar

Long enough to accept it. Lots of reasons that ultimately add up to being an inadequate person, but also no transportation/income in a semi-rural area (also health/personality issues) so I’m a shut-in and thus don’t ever meet people. That said, even in school/college it’s not like I ever really made strong connections with people, romantic or otherwise. Non-religious in USA (esp. given rural) certainly doesn’t (and more so didn’t) help with a dating pool either.

And even if none of those were issues, I’m just not that interesting. I suspect the people who might like to be around me are probably also in their house more-often-than-not, and not within any distance/likelihood of meeting.

Huh, I’m using technology as an escape from woodworking. Lack of space/tools and a few times when I tried to do something the wood was too seasoned (last thing I tried was whittling hoping to do it in my room anytime and not have dust as an issue, cheap folding knife probably didn’t help)

Well not fully true on the escape part, I just drop things really easy when I run into issues like that. Well that and I haven’t done anything noteworthy with technology or woodworking.

I just checked, apparently we have a ~16 gallon can (15 7/8ths*) and use 33gal bags. It doesn’t seem that much bigger (bc volume) but an overfilled bag will still have room in it when removed (it’s useful for last-minute additions on garbage day).

I don’t know if you need to go this far, but maybe it is why they still fit the can properly with the not-expected-fit orientation like I described to prevent overfilling. 30gal might work, I guess it seems there isn’t much choice here though (otherwise I’d say try 5-10gal/~20% higher rather than double).

*= Rubbermaid 3541, “Slim Jim” not cheap for plastic but we’ve had it for years so I’m not sure if it was that expensive when it was purchased

In my house we have slightly oversized trashbags, have the bag oriented the other way (so when you pull the bag out it does not get stuck*), make sure the drawstring is over the lip, and this depends on the design of your trash-can but just see the picture. Image link for non-Kbin.

*= this is specific to a larger bag in a tapered container. If the orientation matches closely, lifting causes it to expand at the bottom when you lift so you’re only lifting the bag at first (also this allows it to get stuck when it’s overfilled). Rotated the other way it cannot expand fully until it is out of the container.

Yeah, the only language I’ve seen/tried that actually feels right*.

But for me it falls down when it comes to needing other people and/or the specific engine-level stuff that I want to get started. I was hoping to start out simple with Raylib bindings, but even that I can’t get vertex colors on imported models to work and I tinkered w/my own 2D polygon format but it was too much work for me to finalize.

My part of the fediverse doesn’t seem to work well for asking niche questions at least, I don’t see much talk on Nim and it doesn’t help that it’s hard to find when people don’t say nim-lang. Also there are 2 replies to you that aren’t federated to where I can see them (and my art threads–lowpoly+vertex colors, for instance plant–aren’t federated to your instance).

*= That also may be a mix of my issues plus how some people style their code, though.

The problem’s your ass.

Being serious, I’m not sure how you eat enough bread to cause this unless you have some sort of stomach-related-issue or gluten intolerance or something. Unless you just eat way too much bread and then mix it with something that it reacts with?

My point is, going by the language in what you linked, the manufacturer you went with sells neither electronic devices nor devices that facilitate the use of any liquids/oils. So it does seem like their dumb policy/cautiousness not them being forced, though I am not a lawyer. Even being strict, if there was a device they sold that fell under the law I think it’d be the torches, as you said if someone has a lighter and material+paper or anything else that’s all that’s needed for smoking.

I was pointing out another manufacturer (quite popular/known and they only do electronic stuff, but AFAIK nothing for liquid/oils) and they have not bothered with this policy at all. They do allow the customer to request a signature check, but that’s all I see.

I saw that after posting. I’m not sure if the shipping law depends on the product but I got an Extreme Q from Arizer years ago and just checked: there is no mention of a required signature (though being a desktop unit and twice the price, it is a different product).

So maybe you could’ve just bought from somewhere else, assuming this is the seller being overly cautious and not a wide-sweeping law.

I think it would just burn the tobacco rather than vaporizing it

I mean if the temperature is set low enough (also convection) it should prevent combustion(/harmful byproducts) for most materials. Like under 200C especially.

Although I’m not sure vaporizing tobacco intended for smoking would taste all that great and smokers generally don’t seem to care anyway. Sounds gross to me, then again so does nicotine in general.

I could see it in the specific case of a cheap (steam) vape pen purchased without debit/bank card off of a general store site. They check the mail and pocket it, get vape juice from somebody. Charge+fill and it’s ready in a pocket or backpack etc. Similar for concentrates, portable dry vaporizers (or something like dynavap) maybe a bit less.

A $100+ desktop dry vaporizer purchased from a dedicated website seems like it’d be harder to hide unless parents are really inattentive. Miss the credit/debit record, miss the delivery at the door, then them carrying it in (+branded boxes), a dedicated spot in their room where it’s plugged in, and an almost ritual to properly heat up the glass/material that might give it away (glass clinking, balloon bag filling, fan on/off etc).

My comments seem like they’re getting more votes/replies than usual. That could just be because of better stability though, also coincidental/context?

Though I posted 2 threads (OC, simple 3D models with vertex colors. banan) 2 weeks ago that didn’t do much (and they both had federation issues in different places, one went to lemmy.world and not other places and the other thread did the opposite) in Kbin communities that don’t have any new activity still. I thought about posting to artshare (on LW) to see if that’d be better but I also haven’t done anything new with it recently.

It was a streaming site that pulled from a large amount of other sources automatically.

Funnily enough it didn’t have any discovery features whatsoever (no front page, popular, latest etc), it was just a search bar that took you right into the video so you needed an idea what it is you wanted to see. And I don’t think it was nearly as popular as other sites (like you probably weren’t finding it from search results, as I don’t think it even had the info that’d be grabbed, and probably didn’t even have SEO or anything like that)

With some of the things you listed, probably hazing.

I’m guessing “welcome” might be better translated as an initiation, but hazing is more clear that it is humiliating/degrading and/or dangerous (and maybe even not much of a choice). (Edit)