Hey girrrrl?!

No. I initially thought of publishing the files. But there are some issues with the design I didn’t fix and the whole thing is built around the NanoPi M4V2, which I don’t think you can buy anymore.

Bowling.

Don’t know about Ibuprofen, but Paracetamol overdose is horrible, agonizing death.

It is a It’s always sunny in Philadelphia reference: The Gang Buys a Boat / Wikipedia.org

Balatro was yesterday. I swear!

Didn’t they make the change recently?

The seller mentions the drives are fully tested, but does not offer a warranty, aside from the Ebay 30-day return policy.

I left a comment to the Ebay seller and asked the same question, but I did not get a reply.

Ah yes ! I just fixed that. Thanks.

What do you use for the bit-by-bit test and how long does it take (depending on disk size) ? I have read about badblocks and that it could take an entire week to test one drive of 12TB, I didn’t have the patient to do that. The long SMART test already took nearly 20 hours in my case.

Thank you

Thank you ! It was a cool design project, but I ended up no publishing the design as it is quite difficult to assemble and work with. here are a couple more photos:

The black box with white front and blue LED lights, yes. I designed and built it myself. The case is made of laser-cuted plexiglass and 3D printed parts. The front plate is PLA, internals are PETG. It’s build around an ARM Single-Board Computer: NanoPi M4V2 with a SATA extension hat.

In a previous post, some were recommending me to use helium-sealed drives for lower noise. The disks I’ve bought are helium-sealed, but they are definitely a little louder at 7200rpm than 5400rpm drives. It’s still acceptable.

I love jellyfin, it’s great ! I haven’t played with Plex much to be honest, so I can’t really compare

I will never make it to Pee Pee Creek on time. I can’t hold it this long !

My media collection is not backed-up, expect for the spare disks I have now. My photos and documents are encrypted weekly and sent to pCloud. They are also synchronized to my computer and phone with Syncthing. This way the important files are protected by 3-2-1.

why not btrfs send | btrfs receive? is there some advantage to rsync?

I didn’t think of this. I am familiar with rsync, I went with it without searching for alternatives.

did you hotswap the drives after each btrfs replace or shutdown and then swap?

I did the swap with the system powered down. I don’t know if my the NanoPi + SATA hat support hotswap.

what’s your host OS and do the drives spin down if inactive?

The NAS runs Armbian. The disks are configured to spin down, yes. I don’t know if this caused me the issue while replacing disk 2. I suppose not, since during replace the disks are all reading continuously. But I don’t know for sure.

Edit: fixed copy-past mistake with quoted sentences

I guess I got lucky with this batch, they all seem to work perfectly. But only time will tell if this what truly a good deal.