I bought a piece of 1.5 inch stiff foam to try to fix a sag in a bed. It didn’t work but having that thick piece of solid foam around has been a life saver.
Need something flat to put a laptop on? Throw it on the foam. Going to be doing something that requires you to be on your knees for a while? Get the foam!
It went from stupid purchase to something I’d gladly replace if it broke.
Got a bidet as a joke gift for Christmas a few years ago, it has been an absolute game changer. Hate pooping anywhere but home now, I actually feel clean, and use much less toilet paper.
When I worked at a small startup, we were moving to a new office and I was asked to help with the buildout. I engaged with the flooring vendor, and he came by one day to drop off a carpet sample. He put it on my desk where my mouse was. It was a rectangle sample of tight knit office carpet, about 18”x22”. When I got back to my desk, I just put my mouse on top of it and started using it as a mouse pad. That was 15 years and 3 companies ago, and I still use it as my mousepad. It’s perfect for the mouse to glide on, soft enough for my wrist to rest on, absorbent of sweat or drink condensation, and large enough I never hit the edge. I will never not use it. It is my mouse carpet, and I love it.
So you’re saying you decline to take this business opportunity which could have made you rich for 15 years just to feel superior to us gaming-spaceage-mousepad plebs with your exclusive desk carpet? How dare you.
How does it feel being superior to all the lame mousepad users?
Good. Really good.
I work in automotive interiors tooling. We had a customer bring by a sample of this headliner material. But they brought an entire roll of it, four feet wide, no idea how long. Probably 75 feet. I cut a couple feet off of it, now my whole desk is a mousepad.
Better than car carpet mousepad - imagine vacuuming your desk for 15 minutes and still have sand particles jumping around under the vacuum head like fleas.
That is a nice solution. There are also these giant mouse pads that can cover most of the desk. They are awesome.
An oversized poncho cape from the local Goodwill. It was woven in different shades of blue and while I’d never wear it outside, I’ve used it as a wearable blanket at home for a few years now.
I found out it was actually hand made, and costs 300+ USD from the original shop. Bonus points, I feel like a wizard when I wear it
Here’s an odd one my wife and I were just talking about. Some years ago, we were redoing our kitchen and the contractor told us to go buy the kitchen faucet we wanted. We went off, looked at several, and picked the one we thought looked the best with what we were doing.
When the contractor went to install it, he opened the box and a battery pack fell out. I couldn’t for the life of me figure out why a faucet would need batteries. It turned out that you can turn it on and off by touching it anywhere (handle, faucet itself, whatever), you just leave the physical handle open and set where you want it, then you can touch on and off. I thought it was the dumbest thing ever and we’d never use it.
Flash Forward to now and it’s one of the most used conveniences we’ve ever bought. All those times your hands are covered in raw meat or other cooking mess? Just touch the faucet with your elbow. Rinsing a bunch of veggies one at a time? Tap on, tap off. It works flawlessly, unlike those touchless ones at the airport: no delay and works every time. We will never have a kitchen sink without it - my wife wants them for the bathroom.
I needed a “lap desk” or something to put my laptop on, but I wanted it to be low-profile and I could only find a wooden cutting board. Now wooden cutting boards are the only thing I use as lap desks because most actual lap desks I find are super bulky.
I read that as “fap desk” was intrigued then disappointed.
For fap desk you really want silicone
Just cut a hole in the cutting board
That’s how you end up getting a cutting board stuck on your dick.
Duuuude. That’s a creative idea I might also use if I need a lap desk again. And something easy for if you need to put a laptop on a soft surface, won’t be wobbly like the bean bag ones.
I also ended up doing this after my dad suggested it as an idea… and it’s actually a really great suggestion, they work fantastically well for this purpose!
Yeah it’s exactly what I was looking for! The one I’m currently using was actually the only cutting board that was big enough in the store that I was in, so it has goofy cookings decals all over it 😂
It’s a charcuterie board, not a cutting board, its for parties, the illustrations are telling you what kinds of snacks to put out. What a cool idea for a lap desk, it’s so pretty and unique.
Ah that makes sense. I’ve only seen charcuterie boards that have the trays carved into the wood. Either way, it works!
Mine is pretty plain; honestly, I find yours appealing in a sort of artistic way haha
The “epicurian” brand is perfect for this, or their knockoffs. Its like 1/4" thick (6mm) composite wood. I have one that even fits in my laptop bag - way better than any designated “lap board” I’ve ever found.
That’s what I ended up using as well. Best ten euro
A 3D-Printer, I thought I just play around with it and get bored, but you discover so many things that you can do!
The handle on the fridge broke? Print new ones. Need a Flowerpot? Just print one. The router needs a wallmount? I have one ready in a few Hours.
Also I can watch it print for hours, very fascinating and calming.
ventilate my dude. read up on breathing around your 3D printer while its printing. no bueno
Micro plastics making me feel spastic!
E: if you know the song I will give you a Lemon
Aqua - Barbie Girl.
🚫
they were close!
Wait until you start printing more printers
Dammit! I feel so attacked. But I can quit any time I want.
I just don’t want to.
Bought 1, which printed number 2, which printed number 3. Really want to design a delta rn even though there is still so much to fix/upgrade on al 3
I got one to print parts for my drones thinking it would be no big deal and it turned in to a hobby in itself.
I’ve really been resisting getting into drones via my 3d printer. I just love the idea that I could print out parts and make my drone better and better!
I only use it for things like guards, wire/cap/cameral holders… gopro case… things like that. but the frames are all carbon fiber. There are templates to print the entire drone out off the printer but I have not done that.
You can get the electronics pretty cheap. It might be a fun project for you :)
I remember literally watching it for an hour when it was new, it was fascinating.
Which model do you have?
An Ender 3 V2
I found one in a bin, and after a dumpster dive and £10 worth of parts, it’s now the most used appliances in my house.
Now I’m thinking of getting one. But hear me out, I have a lot of tools already. And it will suck me in to stuff that I didn’t know existed.
Get a Sovol SV06, it’s going to be cheap, easy to use, and minimal maintenance. You won’t regret it. Even if you just use it for jigs and custom clamp points, or something simple like replacing a missing end cap or something, every shop/garage/home can benefit from a 3D printer. It can be just another tool, or a hobby that consumes you, you can dive as deep as you want lol. Feel free to PM me if you have any questions!
Yeah except you’re never really saving a lot of money and even when you do some duct tape would have worked just fine
That’s simply not true. Paying $250 for a printer of decent quality, and a few functional repairs will pay for itself…
well, the handle was fixed with duct tape until I got a printer …
nothing will ever truly replace duct tape!
So noob question - I got a 3D printer relatively recently and have printed a few things with it by downloading files from various websites.
How do you go about making or getting files for your specific custom jobs like these please?
The job I recently started has three 3D printers that I’ve started tinkering with. They’re very handy, I started trying to use one of the modeling softwares we also use (Solidworks). I haven’t designed much, but I have finally designed something that would be for me personally; I got a figure of Cloud Strife from Final Fantasy 7 recently and the pegs on his stand are too small, so he doesn’t stand on there securely. I’ve yet to print it out to make sure my new measurements work, but the fact that I can just whip something on the computer and the printer makes it into reality is still something that makes me very excited.
I’ve bought my own printer, but I’m still waiting on Prusa to ship it out.
An ebike: I don’t even really drive anymore most of the time and it beats the hell out of being stuck in traffic. Getting around is fun again.
I always enjoyed cycling and still ride my MTB, but for getting around town quickly, ebikes are hard to beat.
Bug zapper flyswatter. Like you can buy at Harbor Freight for a few bucks. It might not be a terribly effective solution to the overall fly population, but in terms of grim-bloody-vengeance-per-dollar, it’s one of the best investments I’ve ever made.
My wife bought me a Beard Bib as a joke gift after I found it online one day. It’s basically a smaller version of the bibs you wear when getting your hair cut, but with suction cups attached to the bathroom mirror to hold it horizontal and catch stray hairs when using an electric shaver. It looks ridiculous.
I now use it every time I trim my beard, even if my wife still laughs at me every time she sees me in it. Cleaning up all the stray hairs was always a pain in the ass, but this thing does a surprisingly good job at catching 99% of the hair, and I can just brush it all into the trash when I’m done.
My wife got me a fitbit. I resisted a little bit because I didn’t want to have yet another device to monitor, charge, and maintain etc. I’ve been really surprised and impressed and how effective it has been in subtly encouraging me to make some small improvements in my habits. Not a bad deal for $100.
Bed sheet suspenders. Dumb problem, stupidly cheap, horribly made, and ABSOLUTELY fixed the friggin sheets being yanked off the corner of the bed twice a night by my tumble-dry-medium sleeper of a spouse.
When they finally broke after almost 2 years I sewed some that’ll last 10 years and I don’t regret them at all.
my tumble-dry-medium sleeper of a spouse.
ROFL! Hahaha… I am gonna call my gf that from now on…
I never thought of this. Good idea. Purchased.
Hello, I am the tumble dry spouse and the number of times I’ve been thwapped in the face with elastic in the middle of the night is too damn high. I’m going to get some of these. Do you have a tutorial or explanation of how you sewed some?
This one I can absolutely agree with. Takes an extra couple seconds when you’re changing sheets but you will never have to redo the corners ever again.
However, I haven’t been needing them since I started using Threshold sheets from Target. The corners are deep and have a ton of stretch. Of course I keep the suspenders around for when I need them because they’re so small that the footprint is negligible.
Mechanical keyboard. Almost had no money back then, but wanted to treat myself. It costed 100$, and I regretted it the next morning. Felt like shit, but it was so cool to type on.
After 5 years, this metal-frame keyboard managed to survive many outside gigs, long travels, literal war, and it’s still with me. And I still love typing on it. Sometimes I code just to type. You can guess why I don’t use code completion tools.
Scooter. Not an electric one. I had a thought once “hey I did ride one in childhood, maybe it can be a bit of nostalgic fun from time to time”. Got myself the cheapest Chinese thing I could find, “no point investing too much into a fad”.
Turned out a scooter is absolute peak urban mobility. Short distances become much shorter. Mid-long distances become short. Granted, for a longer trip somehow the time gains diminish, probably because it’s not as efficient as a bike. But a scooter isn’t a long-hauler. It’s there to zip through an empty mall. It’s there to be folded up in a second and brought into a bus or a shop without being a hassle. It’s like 3-4 kg, not too fast for sidewalks but fast enough for bike roads, extremely easy to stop, doubles as a cart when carrying bags of groceries home.
The chinese one broke after 1 season because I was riding it everywhere. Then I got myself one from a better company, I chose it for small weight and portability. It’s technically children’s thing but I’m well below weight tolerance and also smol so it’s easy to handle. It’s already like a 5th year and whenever it’s not raining or too cold I ride it for shopping, errands, leisure walks, to work… Almost daily.
The wheel turns out to be a pretty good invention for multiplying by pi. For example, bicycling is about pi times faster than walking, with the same amount of effort.
They’re absolute shit if you live in a hilly city. Felt like I was going backwards.
Oh I believe. I live in an area that’s very flat.
I love the concept, tried some and would be willing to pay good money for a kick scooter that folds small enough to fit inside or hang off a big backpack, made of some super light material like carbon fibre
I’ve lost hours searching for such a thing online and the closest one is the Valor scooter. but unfortunately it’s ugly and they only make it for kids and I’m a big guy :/
Unfortunately I think we’re not there yet. My one folds into a meter-long bundle of a metal plank with wheels and a metal pipe and while it;s still light and handy it won’t fit in any backpack.
I feel it’s a lack of appetite. very few adults actually want non-electric. I’ve seen a much wider range of electrics, including small form, experimental ones and more :/
Which scooter do you have now?
The lightest from Decathlon which is large enough to hold someone over 12 yrs of age. They may or may not still have them on offer as it was a few years ago.
deleted by creator
Custom-made ear plugs. Even if you only wear ear plugs occasionally (I do when in a noisy hotel, or when a neighbor goes a bit too crazy), they are so worth having.
Basically you go to an audiologist and they put something kinda liquid in each of your ears to take a mold of your ear canals. A couple of weeks later, you have plastic earplugs that have the exact shape of your inner ears.
Upsides: • They work, always. I would typically use wax or silicon disposable ear plugs before that, and sometimes in the middle of the night they might move and let the sound in; those don’t. Also, foam disposable ear plugs don’t stay in my ear, don’t ask me why. • They never hurt. Since disposable ear plugs get shoved into your inner ear until they take the shape, they continuously push against the walls of your ear canals. I would often feel kinda bruised after using them for a long time. • They are crazy comfortable. Put your ear on a pillow, and you barely feel them at all. • But do they block too much sound? That’s up to you. Basically, you choose the level of noise you want to keep out, which I believe is achieved by using different kinds of plastic.
They’re not a trivial purchase (I think mine cost $150), but then you use them for decades, so it’s definitely worth it. It was a stupid purchase in my case, because I bought them on a whim out of anger against my neighbor’s party one night; but they’ve followed me everywhere since!